User Manual

GETTING STARTED


OTHER EDITIONS


LAUNCHERS


MODULES


PLATFORM


APPENDIX


TUTORIALS & HELPFUL TRICKS


STRATEGIC PARTNER LINKS

Sepasoft - MES Modules
Cirrus Link - MQTT Modules

RESOURCES

Inductive University
Ignition Demo Project
Knowledge Base Articles
Forum
IA Support

ALL USER MANUAL VERSIONS

Ignition 8.1. Offline Version (04/2021)
Ignition 8 Online Version
Ignition 7.9 Online Version
Ignition 7.8 Online Version

Deprecated Pages

SDK Documentation

Employees

Sign In

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »


The Tag Editor is robust interface that contains all the properties that can be configured for Tags. In the Tag Editor, you set the Tag's name, value, numeric and meta data properties, security, alarming, history, and more. For information on all the settings in the Tag Editor, see Tag Properties.


Tag Editor Diagnostics

The Diagnostics tab, under Details, contains meta information about the tag. The diagnostic values do not update while the Tag Editor is open, but they can be updated by pressing the refresh button. 


NameDescription
Alarm*

A subcategory for details pertaining to alarms configured on the tag. Each alarm will receive it's own subcategory. 

NameDescription
Last StateDisplays the last state of the alarm.
Live Event CountThe number of live or unacknowledged events for the alarm. The maximum count is determined by the gateway's Live Event Limit setting.  
Deadband

A subcategory for details pertaining to the deadband settings on the tag. These diagnostic values are only available when Deadband is set to a value larger than 0. 

NameDescription
Last value

The following feature is new in Ignition version 8.1.11
Click here to check out the other new features

The last value on that tag, as recognized by the deadband. 


History

A subcategory for details pertaining to the history settings on the tag.

NameDescription
Deadband
NameDescription
Last Value
Limit
Mode
Min/Max Age
NameDescription
Max Age Limit (ms)
Minimum Age Limit (ms)
Pending Value
System Time of Last Storage
Timestamp of Last Stored Value
Stored Value Count (since startup)
OPC

A subcategory for details pertaining to OPC details on the tag. These diagnostic values are only available when Value Source is set to OPC.

Name Description
Last Subscription ValueA qualified value representing the last subscribed value. The value on this setting ignores the deadband. 
Server NameThe name of the OPC server the tag is subscribing to. 
Subscription NameThe name of the subscription, used by the OPC server. 
Valid Tag Group?States whether or not the tag group the tag is configured to use is valid. 
Alarm AcknowledgedDisplays any errors from the Alarm Acknowledged tag event script. Only visible if a script is defined on the corresponding tag event
Alarm ActiveDisplays any errors from the Alarm  Active tag event script. Only visible if a script is defined on the corresponding tag event
Alarm ClearedDisplays any errors from the Alarm  Cleared tag event script. Only visible if a script is defined on the corresponding tag event
Datasource StatusStates which datasource is configured for the tag. Only available when Value Source is set to Query.
Is LeasedIf true, indicates that the tag is using a leased tag group, and is currently executing at the leased rate. 
Is ScaledIf true, indicates that Scale Mode has been enabled. 
Last published valueRepresents the last value on the tag when the diagnostics tab was last updated. 
Limit

The following feature is new in Ignition version 8.1.11
Click here to check out the other new features
The realtime (not historical) deadband value on the tag. 

RangeWhen Deadband Mode is set to Percent, indicates the range of values between the Engineering Low Limit and Engineering High Limit
Quality ChangedDisplays any errors from the Quality Changed tag event script. Only visible if a script is defined on the corresponding tag event
Quality DiagnosticsReports any quality errors about the tag. This is typically only present when there is a configuration issue with the tag, such as when Value Source is set to Query and a Datasource value has not been set. 
Tag Definition Valid?A flag that indicates whether or not a tag configuration is valid. 
Tag idA unique identifier for the tag. 
Value ChangedDisplays any errors from the Value Changed tag event script. Only visible if a script is defined on the corresponding tag event
  • No labels