Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 18
Next »
Creating a Role
- On the Gateway Webpage, go to the Config section, and choose Security > Users, Roles from the menu on the left.
The User Sources page is displayed.
- Click on the manage users link for the User Source you want to manage.

- Click the Roles tab. Look for the blue arrow at the bottom, and click the Add Role link.
- Name the role by entering it in the Role Name field, and click on the Add Role button.
The role is now available to be associated with specific users.
Assigning Roles to Users
- On the Gateway Webpage, go to the Config section, and choose Security > Users, Roles from the menu on the left.
The User Sources page is displayed.
- Click on the manage users link for the User Source you want to manage.
- Click the Edit link for the User you want to edit, or click the blue Add User link to add a new user. (When adding a new user, you can also add their roles at the same time).

If you're creating a new user, the Add User window will open. Enter the user's properties including the roles you want this user to have. If no roles have been created, then follow the instructions in the Creating a Role section from above. If your user already exists and you simply want to modify their roles, the Edit User window will open. (The Edit User window and the Add User window look identical).
To assign a role, there is a Roles property with a list of roles that have already been created. Select the role(s) that you want this user to have. (It's not required for a user to have a role, but be aware that they might not have access to an area of the project that requires them to have a role).

- Click either Add User if you adding a new user, or Save Changes if you are modifying a user's role(s).
The user now has the privileges associated with the selected role(s).
Role Hierarchy
Often you might want to have one role that includes all the permissions for another role, i.e., Supervisor can do everything that Administration and Maintenance roles can do. In the Designer, access to Components can be restricted to specific security roles. You can give any Supervisor both of the Administration and Maintenance.
Managing Users
User Sources support managing the users and roles from within Ignition to varying degrees. Some User Sources are fully manageable, meaning that you can administer the users, roles, contact info, and so on from within the Ignition Gateway, as well as inside a Vision Client. Other User Sources do not support this at all, while yet others only partially support it. Make sure you understand how and where the administration takes place before you choose a User Source type.
For User Sources that support it, you can manage the users and roles from within the Ignition Gateway's web configure interface under Config > Security > Users, Roles. Click on the manage users link for the User Source you want to administer.
Often, it is desirable to let some management or administrative users of a Vision project manage other users without having to log into the Gateway's Configure section. To do this for a User Source that supports being managed, you can simply use the built-in User Management Panel that comes with the Vision Module.
User Management Component
Ignition has a special User Management component in the Vision Module that allows you to add, modify, and delete users and roles (and more) inside the Designer and the Client. This is simple to set up and use.
Using the User Management Component in the Designer and Vision Client
- In Designer, go to the Project Browser and then to Vision.
- Create a new Window or open an existing one.
- Drag a User Management component to your window. This component will automatically point to the default user source being used by your project. You can change the User Source property if needed.
If you already have some users and roles setup using the Gateway Webpage, you will see them in the User Management component. If you don't have any users or roles setup, you can create them here. Use the icons on the right side to add, edit, or delete a user or role.
To add a new user, put the Designer in Preview Mode. Click the the plus
icon next next to the user section.

- The Add User window will open. At a minimum, enter the Username and Password. All other properties are optional. When finished, click Save.

- To add a new role, make sure the Designer is in Preview Mode. Click the the plus
icon next to the role.
The Add Role window will open. - Enter the name of the new role. Click Save.

- Now you can see the user and role that were just added in the User Management window.

Save Failed. You are not authorized...
By default, changes to the system's user source may not be made from this component. This prevents users from locking themselves out of the Gateway, or give themselves access to the Gateway.
However, this behavior can be overridden from the Gateway: Config > System > Gateway Settings page, and setting the checkbox for the Allow User Admin property. This allows for the administration of the Gateway's system user source from the Designer and the Client. Unless this is enabled, the Vision Module's User Management component is prevented from modifying the Gateway system's selected user source and you will see an error at the bottom of the component if it is attempted.
Alternatively, you can simply have a separate User Source for the Gateway. This allows you to have a User Source containing all users that should have client access, and a Gateway-specific User Source that allows access to the Gateway and Designer. This would potentially entail changing the System's User Source: Config > System > Gateway Settings > System User Source in the Gateway Webpage.