User Manual







Sepasoft - MES Modules
Cirrus Link - MQTT Modules


Inductive University
Ignition Demo Project
Knowledge Base Articles
IA Support
SDK Documentation
SDK Examples


Ignition 8
Ignition 7.9
Ignition 7.8

Deprecated Pages

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

The Designer Launcher makes it extremely easy for you to hit the ground running on your projects. The Designer Launcher locates all Gateways that are available on a local network. Each Designer that is added to the My Designers represents a shortcut to a particular Gateway, and once that Designer is opened you can access or create new projects on that Gateway. The same Designer can access all the projects that are available on that Gateway, and you don't need to add the Designer multiple times for different Gateways!

Pin a Designer Launcher shortcut to your browser's task bar, and you can open your Designer, and create or edit a project in a flash! 

Login credientials/permissions

Keep in mind that just because the Designer Launcher located a Gateway, it doesn't mean you have the right credentials/privileges to login on that particular Gateway.

On this page ...

Designer Launcher - Download and Install

Use the following steps to do a one-time install of the Designer Launcher from the Gateway webpage:

  1. If you are already logged into Ignition, then go to the Homepage of the Gateway Webpage, otherwise login as the user with full / administrative privileges.

  2. From the Gateway webpage, click the Download button for the Designer. 

  3. Select the Download button for the platform you are running on: Windows, Mac OS, or Lunix. In this example, we are running on Windows.

  4. Run the downloaded file (DesignerLauncherSetup.exe) found on the lower-left of the window, or go to your downloads folder and double-click the file to run it.

  5. The Select Additional Tasks window will open. Here, you can select additional tasks that you would like to setup to perform while installing the DesignerLauncher. It's a good idea to Create a desktop shortcut to pin to your browser's task bar so it's easily accessible when you want to open the Designer Launcher. Click Next.

  6. Now, you're Ready to Install the Designer Launcher on your computer. Click Install to continue. 

  7. Once the Designer Launcher is installed, complete the setup by checking the box to Launch Designer Launcher and click Finish.

  8. The Ignition Designer Launcher window will open. Here you can select any Designers you have permission to launch. If you are running this for the first time, by default, you will only see one Designer
    You have the option to Launch, Create Shortcut, or Launch + Create a Shortcut for that Designer on your desktop.

    If you Create a Shortcut, it will look like the image below with the name of your Gateway on it like the icon below. When you click on the shortcut icon, it will launch the Controller Gateway.

    Since a Designer Launcher icon was created in Step 7 and is aready on your desktop, and you can keep it on your desktop or pin it to your browser's task bar. By clicking the Designer Launcher icon, it will open the Ignition Designer Launcher window and display all the Designers you have permission to launch.

  9. The Designer starts up and the login window is displayed. Enter the credentials for the administrator or user with full privileges for the Designer, and click Login. It should be the same as the login for the Gateway Config section. Note: Login credentials are set in the Config section of the Gateway Webpage, under Security > Users, Roles.

  10. The Open/Create Project window is displayed giving you two options: create a new project or open an existing one. Since we don't have any existing projects yet, create a new project. 

Configuring the Designer Launcher

There really isn't much to do when configuring the Designer Launcher. The Designer Launcher finds the Gateways, you add the Gateways to My Designers, and the only thing left to do is create your Designer shortcuts. You can create a shortcut for each Designer, or use the Designer Launcher to display all your Designers. Let's open the Designer Launcher to create a few shortcuts

  1. If you followed the steps in the previous section for installing the Designer Launcher, then you already have the Designer Launcher shortcut on your desktop. If you don't, then go back to the Gateway webpage and download and install the Designer Launcher again. Follow the wizard instructions as shown in the previous section. Be sure to check the Create a desktop shortcut on the Select Additional Tasks window. 

  2. Find the Designer Launcher on your desktop and pin it to your browser's task bar so it's always handy. Click the Designer Launcher shortcut to open the Designer Launcher to display all the Designers that you have permission to open.

  3. Click on the Designer Launcher shortcut to open the Designer Launcher window. Click the dropdown box for one of your Designers, and select Create Shortcut

  4. Go to your desktop and find your Designer shortcut. Placing shortcuts on your desktop or pinning them to your browser's task bar makes them readily accessible for opening a Designer quickly! Click the shortcut to open your Designer. 

Adding Additional Designers

To add additional Designers, open the Designer Launcher and choose the Gateways you want to add using the following steps. 

  1. With the Designer Launcher open, click the Add Designer button.

  • No labels