Page History

OPC Tags

An OPC Tag is an OPC server and address which drives values. The OPC server is typically a PLC or device, such as Ignition's OPC-UA server, or any third party OPC-UA server. 

In the Tag Browser, double click on any existing OPC Tag, to see the the OPC Server name and Item Path.  

Image Modified

Memory Tags

The Memory Tags are simply values. The value is specified during configuration, and is stored when written (if the Tag allows writing).

Image Modified

Expression Tags

The Expression Tags are driven by an expression, and its values are derived from a calculation. The expression syntax is the same as for property bindings, and allows mathematical operations, references to other Tags, logic operations, functions, and more. This expression example converts Celsius to Fahrenheit.

Image Modified

SQL Query Tags

The SQL Query Tags execute a SQL Query, whose result provides the value for the Tag from the SQL database. Like an SQL binding in Vision, SQL Query Tags can reference other Tags to build dynamic queries. This SQL query example is getting the average of Ramp1 from the History table. 

Image Modified

Complex Tags (UDTs)

Complex Tags are created out of standard Tag types, but offer a variety of additional features. In simple terms, you can think of them as a way to create "data templates", where a particular structure of Tags is defined, and can then be created as if it were a single Tag. This UDT example shows two Motor instances, the data type Motor, and all the Tags that make up the structure (i.e., AMPS, HI SP, HOA, RUN_CMD, and STATUS). 

Image Modified

Derived Tags

A Derived Tag is an abstracted Tag that refers to another Tag. They are similar conceptually to Expressions Tags that reference another Tag, but Derived Tags have some additional functionality. Namely, they can write back to the referenced

Tag. 

Source Tag Path

The Source Tag Path property of a Derived Tag depicts which Tag the Derived Tag should reference. This is similar to the OPC Item Path on an OPC Tag, except it points to an Ignition Tag. 

Aside from editing the Tag from the Designer, the Source Tag Path on a Derived Tag may be modified by writing directly to the SourceTagPath property on the Tag, or using a Tag Binding on a Vision component

Image Modified

Additionally, the SourceTagPath property may be changed through scripting: 

#Example of writing to the SourceTagPath attribute via Python Script
system.tag.write("Derived Example/Derived Tag.SourceTagPath", "[.]Folder/New Source Tag")

Value Derivation

Instead of a Numeric section, Derived Tags have  a Value Derivation section accessible in the Tag Editor. This

section allows you to leverage Expressions when reading from or writing to the source

Tag, which provides a greater degree of customization than the traditional Numeric scaling settings available to OPC Tags. 

Image Modified

This interface provides an opportunity to scale the written and read value. For example, if the source

Tag was in Fahrenheit, and the derived

Tag should be Celsius, we could use the following expressions:

//Read Expression
({source}-32)*(5/9)
 
//Write Expression
{value}*(9/5) + 32

Derived Tags in UDTs

When added as a member of a UDT, Derived Tags may reference peer members. Additionally, UDT parameters may be used in the Source Tag Path. 

Image Modified

System Tags

System Tags are status Tags that Ignition provides about the Client and the Gateway.  You cannot create any new Tags in the Client or Gateway folders.  The Tag names and folder structure are managed by the Ignition Gateway. However, you can modify the Tags in the Gateway folder to perform alarming, history, and scaling.  You cannot modify the Client-scoped System Tags.

Client-scoped System Tags

Client-scoped Tags provide status information about the client's system.  Every individual client is going to have their own values like IP address, hosting name, username, and more.

 

Gateway-scoped System Tags

Gateway-scoped Tags  provide status information about the Gateway like alarming, database, throughput, memory usage, performance of the server, and much more.

Other System Tags

There are potentially more of these System Tags depending on the modules that you have installed. For example, if the Mobile Module is installed you will see a Mobile folder under the Client and Gateway folders. This will include information about the Client in addition to the Client folder, but only if the client is opened with the mobile moduleMobile Module.

Client Tags

Client Tags, as the name implies, are only available for use in Clients. They are scoped at the client level unlike the Gateway Executed Tags. All clients will have the same list of client Tags, however, the actual values are unique and independent for each running Client. In other words, even though client Tags are created in the Designer, each client will create their own instances. This makes them very useful as in-project variables , for passing information between screens, and between other parts of the clients, such as scripting.Client Tags are a hybrid of memory, expression, and SQL Query Tags, and do not have a scan class. When a client Tag is set to run as an expression or query, a poll rate is specified dictating how often the value should be calculated.

Client Tags support most of the data types that standard Tags do (including datasets), but excluding the array types. Additionally, Client Tags do not have a Scan Class property, so the value will only update when the polling property executes, or a reference in the Client Tag's expression updates. 

Expression Type

Client Tags can be configured in one of several ways, based on the Expression Type property. The following options are available. 

• None: Causes the Tag to behave like a Memory Tag.
• Expression: Allows the Tag to utilize Ignition's Expression Language, much like an Expression Tag.
• Query: Executes a SQL Query, similar to a Query Tag. 

• Named Queries: 

  New_in
  Version 7.9.6

  Client Tags may now call Named Queries

Image Added