Versions Compared

Old Version 5

changes.mady.by.user Brandon Au

Saved on

compared with

New Version 6

changes.mady.by.user Nichole Boehnke

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


The IIoT product (formerly known as MQTT) allows this copy of Edge to push data directly into a Broker using the fast and lightweight MQTT data transfer protocol. In effect, this makes your computer (and whatever devices are attached to it) into a remote MQTT publisher. If you are already rolling out new smart devices that connect to your Broker, this allows you to connect all of your legacy devices into the same system.

IIoT product also allows UA clients to connect to the UA server on Edge.  

Edge IIoT activates the following modules:

  • MQTT Transmission
  • Opto22 SNAP PAC driver
  • Emerson ROC driver
  • ABB TotalFlow
On_this_page



Remote Tag Provider

With Edge IIoT installed, Ignition Gateways will be able to create remote Tag providers, targeting a provider on an Edge Gateway: either the system provider or the one realtime Tag provider.

For more information about remote Tag providers, see Tag Providers.

Note

The Edge Sync Services product also unlocks this feature.


Expose Edge’s UA Server

The IIoT product enables UA clients to connect to the UA server on Edge. Applying this product will require that the OPC UA module is restarted before the UA server will be available publicly. Note that you will need to install the MQTT Transmission module to expose Ignition's OPC UA server when your Gateway is licensed.


Install MQTT modules to Activate IIoT Product

After you install Edge, you need to download and install the MQTT Transmission module from Cirrus Link. You can use the free trial as long as you want so you can build and test full solutions before you buy.

  1. To install the Ignition Edge IIoT product, first download the MQTT Transmission module from the Inductive Automation website. 



  2. Next go to the Config tab of your Edge Gateway to access the System > Overview page. 



  3. On the Overview page, scroll Scroll down to the MQTT and click the Install+ button.




  4. Scroll On the Modules page, scroll down and click on Install or Upgrade a Module...




  5. Next click Click on Choose file.




  6. Navigate to the folder where you downloaded MQTT-Transmission-signed.modl, select the file, and click Open.
  7. Click the Install button. 
  8. At the License agreement, select I accept the terms in the License Agreement, then click the Accept License button.
  9. At the Trusted Certificates window, click I want to add this certificate to my trusted certificates and install the module.
  10. Click the Add Certificate and Install Module button.



  11. You'll see a message indicating the module was successfully installed. And the Module will show up on the Module Configuration page in the Edge Gateway now. 




For more information, check out the documentation on the Cirrus Link website https://docs.chariot.io/display/CLD.


Install IIoT Opto22 SNAP Pac Driver or the Emerson ROC Driver

  1. To install the Opto22 SNAP Pac driver or Emerson ROC driver, first download the driver you want from the Inductive Automation website. 
  2. Next go to the Config tab of your Edge Gateway to access the System > Overview page. 



  3. Scroll down and click on Install or Upgrade a Module...
  4. Next click on Choose file.
  5. Navigate to the folder where you downloaded the driver(s) and select the file.
  6. Click the Install button. 
  7. At the License agreement, select I accept the terms in the License Agreement, then click the Accept License button.
  8. You'll see a message indicating the driver module was successfully installed. And the module will show up on the Module Configuration page in the Edge Gateway now, for example the following image shows the Opto22 SNAP Pac driver installed.




Next_link